Load data for .308 Marlin Express + .308 | 110gr | Hornady SP

Recommended Powder(s): Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 110gr \| Hornady SP
Manufacturer SKU:	3010
Bullet Weight:	110gr \| 7.1g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	0.820" \| 20.8mm
Caliber:	.308 Marlin Express load data
Case Length (l3):	1.910" \| 48.5mm
Cartridge Length (C.O.L.):	2.571" \| 65.3mm
Seated Depth:	0.159" \| 4.0mm
Shank Seated Depth:	0.159" \| 4.0mm
Case Capacity:	51.0 Grains of Water \| 3.31 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	47863 psi \| 3300 bar
LID:	LID_B2655_C397
Last updated:	2025-01-01

Load data for 74 loads in caliber .308 Marlin Express with .308 | 110gr | Hornady SP bullet and 37 powders such as Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	87%	42859	90%	**46	100%
ADI AR 2219	<<locked>>	91%	42989	90%	**82	96%
Accurate 2015	<<locked>>	96%	43062	90%	**59	98%
[Accurate 2460]*	<<locked>>	94%	42380	89%	**40	93%
Accurate 2495	<<locked>>	97%	34505	72%	**71	96%
[Accurate 2520]*	<<locked>>	97%	38189	80%	**13	92%
Alliant AR-Comp 👍	<<locked>>	97%	38856	81%	**59	99%
Alliant Reloder-10x 👍	<<locked>>	93%	42482	89%	**69	99%
Alliant Reloder-7	<<locked>>	85%	42482	89%	**04	99%
Baschieri & Pellagri 106	<<locked>>	89%	42641	89%	**64	97%
[Hodgdon Benchmark]*	<<locked>>	95%	42003	88%	**77	92%
Hodgdon H322	<<locked>>	96%	42467	89%	**72	96%
Hodgdon H335	<<locked>>	91%	42786	89%	**79	95%
Hodgdon H4198	<<locked>>	87%	42815	89%	**67	96%
Hodgdon TrailBoss	<<locked>>	95%	29283	61%	**41	100%
[IMR 3031]*	<<locked>>	97%	33141	69%	**02	93%
IMR 4198 👍	<<locked>>	91%	42583	89%	**23	99%
[Lovex D073.4]*	<<locked>>	93%	42888	90%	**33	93%
[Lovex D073.5]*	<<locked>>	95%	42989	90%	**49	93%
Norma 200 👍	<<locked>>	89%	42714	89%	**56	99%
[Norma 202]*	<<locked>>	97%	37304	78%	**58	93%
ReloadSwiss RS 14	<<locked>>	95%	29182	61%	**86	100%
[ReloadSwiss RS 40]*	<<locked>>	93%	42757	89%	**46	93%
[Rottweil R 901]*	<<locked>>	97%	41046	86%	**07	94%
SNPE Vectan BA6 1/2	<<locked>>	84%	42163	88%	**80	100%
SNPE Vectan SP 10	<<locked>>	90%	42772	89%	**76	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	97%	40886	85%	**41	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	32764	68%	**57	92%
[Somchem S321]*	<<locked>>	95%	42511	89%	**56	92%
Somchem S335	<<locked>>	97%	39262	82%	**35	95%
Vihtavuori N120	<<locked>>	89%	42975	90%	**97	100%
Vihtavuori N130	<<locked>>	94%	42119	88%	**97	99%
Vihtavuori N133	<<locked>>	96%	36680	77%	**85	96%
[Vihtavuori N140]*	<<locked>>	97%	34911	73%	**72	92%
[Vihtavuori N530]*	<<locked>>	96%	42540	89%	**46	91%
[Vihtavuori N540]*	<<locked>>	97%	35027	73%	**99	92%
[Winchester 748]*	<<locked>>	96%	42598	89%	**86	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	35389	74%	**89	100%
[ADI AR 2219]*	<<locked>>	81%	31430	66%	**00	92%
[Accurate 2015]*	<<locked>>	81%	26397	55%	**36	92%
[Accurate 2460]*	<<locked>>	89%	36042	75%	**95	90%
[Accurate 2495]*	<<locked>>	86%	23757	50%	**59	90%
[Accurate 2520]*	<<locked>>	94%	33794	71%	**99	90%
[Alliant AR-Comp]*	<<locked>>	81%	23641	49%	**93	92%
Alliant Reloder-10x	<<locked>>	81%	29486	62%	**54	95%
Alliant Reloder-7	<<locked>>	81%	37231	78%	**89	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	32358	68%	**28	93%
[Hodgdon Benchmark]*	<<locked>>	90%	36985	77%	**62	90%
[Hodgdon H322]*	<<locked>>	84%	29022	61%	**28	90%
[Hodgdon H335]*	<<locked>>	82%	31343	65%	**97	90%
[Hodgdon H4198]*	<<locked>>	81%	35679	75%	**03	93%
Hodgdon TrailBoss	<<locked>>	81%	23351	49%	**96	100%
[IMR 3031]*	<<locked>>	91%	27804	58%	**41	90%
IMR 4198	<<locked>>	81%	31720	66%	**57	97%
[Lovex D073.4]*	<<locked>>	88%	36535	76%	**92	90%
[Lovex D073.5]*	<<locked>>	90%	36347	76%	**02	90%
Norma 200	<<locked>>	81%	33257	69%	**43	97%
[Norma 202]*	<<locked>>	91%	31198	65%	**97	90%
ReloadSwiss RS 14	<<locked>>	81%	23308	49%	**42	100%
[ReloadSwiss RS 40]*	<<locked>>	87%	34737	73%	**62	90%
[Rottweil R 901]*	<<locked>>	88%	31473	66%	**71	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	39334	82%	**28	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	31314	65%	**94	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	88%	30966	65%	**02	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	28819	60%	**46	90%
[Somchem S321]*	<<locked>>	92%	37971	79%	**61	90%
[Somchem S335]*	<<locked>>	87%	28805	60%	**66	90%
Vihtavuori N120	<<locked>>	81%	33156	69%	**00	100%
[Vihtavuori N130]*	<<locked>>	81%	28036	59%	**43	94%
[Vihtavuori N133]*	<<locked>>	83%	25251	53%	**51	90%
[Vihtavuori N140]*	<<locked>>	92%	30763	64%	**54	90%
[Vihtavuori N530]*	<<locked>>	93%	38827	81%	**64	90%
[Vihtavuori N540]*	<<locked>>	94%	32184	67%	**20	90%
[Winchester 748]*	<<locked>>	93%	38290	80%	**81	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data